Circuit Tracer & Short Finder ECT3000B
Product Colors
PPECT3000B includes Transmitter and wireless Receiver only, this was designed for technicians who already had an earlier version kit and want to upgrade their short finder without buying the whole kit again.
The ECT3000 Electrical Short and Open Finder makes locating shorts and opens quickly and more accurately than ever before.
When the ECT3000 Transmitter is connected to an isolated circuit, it will quickly determine if the circuit has an open or if the circuit is shorted to ground. The ECT3000 receiver is designed to detect signals from the transmitter and its new adjustable distance indicator allows for accurate detection.
Where to Buy
The ECT3000B Includes:
(Click on the items below for more information )
- ECT3000 Transmitter
- ECT3000 Receiver
- Universal 4mm Adapter
- Alligator Clip
- AAA Batteries
(Accessories not included)
- Trace Out a Short Circuit to Chassis Ground
- Tracing Out a Battery Drain or Current Draw
- Isolate your Circuit
- Verify the Short Circuit to Ground
- Verify an Open Circuit
- Short Circuit inside a wire harness
- Reception Distance from 1 inch to 8 inches
- Tracing Circuits that are shielded (Plastic Panels, Pillars, and Carpet)
- Shut off time is now 10 mins
Transmitter Spec
- Min Operating Voltage 8 VDC
- Max Operating Voltage 48 VDC
- Working Current: 200mA
- Working Frequency: 4KHz
- Max Operating Relative humidity: 80% ( Non-condensation)
- Max Storage Relative humidity: 80 % (Non-condensation)
Receiver Spec
- Power Supply: 2 x 1.5V AAA
- Working Current: When not signal be detected <15mA
- Power Consumption when power off:<10uA
- Max Operating Temp: 50°C
- Max Storage Temp: 70° C
- Max Operating Relative humidity: 80% (Non-condensation)
- Max Storage Relative humidity: 80% (Non-condensation)
