Power Probe 3 with Lead Set PP3LS01

PP3LS01

Product Colors

Power Probe 3 combined with the Gold Series Lead Set makes this kit the ultimate in circuit testing diagnosis. The best sidekick to the PP3 is a kit with different connectors, adapters, and extensions. The PP3LS01 was designed to increase the usability for the Power Probe 3 while diagnosing electrical circuits.

 

Authorized Resellers

  • Voltage & Polarity testing
  • Continuity testing
  • Activating components out of the vehicle’s electrical system
  • Activating electrical components in the Vehicle
  • Activating electrical components with ground
  • Testing trailer lights and connections
  • Checking for bad ground contacts
  • Red/Green Indicator & Audio Tone

  • DC 0 to +70V +1 Digit
  • P-P 0 to +70V
    The frequency response of tone pass through
  • 10Hz to greater than 10 kHz
    PP Display
  • 15 Hz Square Wave
  • 35 Hz Sine Wave
    Power Probe Mode – Continuity to ground
  • First level – Display is enabled less than 20 K Ω
  • The second level – Green LED is enabled less than 600 Ω
    – & +Peak Detector Response
  • Single event capture less than 200ms pulse width
  • Repetitive events less than 1ms pulse width
    Peak to Peak Mode
  • 0 to + 70 + 1 Digit
  • 4Hz to over 500kHz Square Wave input
  • 4Hz to over 250kHz Sine Wave input
  • The threshold for PPAC/Audible passthrough
  • Circuit Breaker 8 amp thermal response – Manual reset

Typical Response
8 amps          10amps      15amps     25amps    Short Circuit
No Trip          20min       6 sec.         2 sec.        0.3 sec.

Power Probe 3 with Lead Set